When purchasing Nick Machinery fully automatic balers, customers can first inspect the situation of the manufacturer on the spot, such as the degree of fine workmanship, process design and supporting components, etc. In this way, customers have a rough judgment in mind when purchasing, and can communicate with the manufacturer to choose the appropriate model. In addition, after purchasing, we will have an operation before use, that is, how to check whetherthe automatic waste paper baler is normal and can be put into operation? The summary of these Nick machines is as follows:

One is the load test machine of the automatic waste paper baler

After the single oil cylinder is familiar with the operation, the load test machine can be carried out. Adjust the system pressure of the automatic waste paper baler so that the pressure indication value is about 20~26.5Mpa, and tighten and tighten the nut. Perform a pressure test on the system to observe whether there is oil leakage.

The second is the no-load test machine of the automatic waste paper baler

Turn on the power of the automatic waste paper baler, loosen the system overflow valve, start the motor, and observe whether the oil pump is stable and reliable during operation. Whether there is any obvious noise in the pump, if not, you can start the test machine.

The above articles are provided by Nick Baler fully automatic baler. If you want to know more, go to Nick’s website for consultation: https://www.nkbaler.com.