Industry News

How do we check whether the automatic waste paper baler is normal and can be put into operation? Nick Machinery summarizes as follows:

One is the load test machine of the automatic waste paper baler

After the single oil cylinder is familiar with the operation, the load test machine can be carried out. Adjust the system pressure of the automatic waste paper baler so that the pressure indication value is about 20~26.5Mpa, tighten and tighten the nuts, and do several Baler Press sequences according to the operation sequence. Add material to the compression chamber, and the load test adopts the form of physical packaging, compressing 1 to 2 bales and keeping the pressure for3 to 5 seconds after the stroke of each fully automatic waste paper baler oil cylinder is in place, and conduct a pressure test on the system to observe There is no oil leakage phenomenon, if there is, remove it after the system is depressurized.

The second is the no-load test machine of the automatic waste paper baler

Turn on the power supply of the automatic waste paper baler, loosen the system overflow valve to make the system overflow safely, start the motor (use the method of stopping after starting), and observe whether the rotation of the motor is consistent with the rotation of the oil pump logo. Start the motor and observe whether the oil pump is stable and reliable during operation. Whether there is obvious noise in the pump, if not, you can start the test machine. 

Gradually adjust the overflow valve handle of the automatic waste paper baler so that the pressure indication value is about 8Mpa. Operate according to the operation sequence, perform single action on each oil cylinder, observe whether its operation is stable and vibration-free, and gradually adjust the main pressure cylinder, side The parallelism between the pressure cylinder, the bottom plate and the side frame, fix the main pressure cylinder and the side pressure

cylinder, and support the tail of the oil cylinder with the adjustment support.

The above two points are the method of checking the equipment before using the automatic waste paper baler, and the Nick Machinery fully automatic hydraulic baler has the characteristics of fast speed, simple structure, stable movement, low failure rate and easy cleaning and maintenance. Welcome to consult the Nick Machinery website : https://www.nkbaler.com.