Industry News

The usage and installation operations are as follows:

1. First adjust the bagging and check the coding effect. At the same time, open the feeding system to feed. When the material meets the requirements, first open the bag of the bagging mechanism, check the vacuum and heat sealing quality of the vacuum box, and vacuum pack the bag. After the requirements are met, start to fill the material and start production.

2. Turn on the cleaning system and clean the feeding system and measuring machine before production to ensure product hygiene.

3. The operator of the mineral water bottle baler is not allowed to adjust certain operating parameters of the mineral water bottle baler machine, such as the number of operations and various parameters of the frequency converter. If adjustment is required, relevant maintenance personnel or technical personnel should adjust it together. In production, the operator can properly adjust the temperature and related parameters of each temperature controller according to the actual situation, but the team leader and section chief must be notified first to ensure that all parameters of equipment operation are controlled throughout the production process to ensure stable operation of the equipment , to ensure normal production and normal operation of products.

4. Turn off the air switch of the main power supply, turn on the power supply to start, set and check the temperature of each temperature controller, roll the film in good condition, adjust the color marking, put a piece of code ribbon, determine the code date and related characters and the products produced on the same day does it reach the requirement.

5. Mineral water bottle Baler Press machine operators pay attention to the safety of themselves and others at any time during the operation process, paying special attention to the safety of heat-sealing knives, scissors, trolley parts, vacuum boxes, camshafts, measuring cups, conveyor belts, etc. and prevent accidents.

All of Nick Machinery's balers can do the job you need, and are very easy to operate. If you have any questions, you can go to the Nick Baler website to learn, https://www.nkbaler.com.