The horizontal metal chip briquetting machine mainly uses the hydraulic cylinder to press the metal chips into the rectangular loading groove in four stages in different directions such as up, down, left, and right. The metal block can be turned over and taken out from the rectangular charging trough, and the retrieving speed is fast, and the working efficiency is high.

Its detailed production process is divided into four stages as follows:

1. Align the position of the moving material with the driving force, and then the metal of a certain material will fall into the material chamber of the horizontal metal briquetting machine from the fixed barrel through the stable material. This is called the blanking stage.

2. The metal material falling into the material cavity is extruded upward by the extrusion head, compressed and formed, and there are several working steps such as rapid feeding, working feeding and maintaining pressure. This stage is called the extrusion stage.

3. Oil enters the rod cavity of the horizontal hydraulic cylinder to push the piston rod of the horizontal hydraulic cylinder back, the upper cover is opened, and the metal material block is pushed to the top of the cavity.

4. In the final push-out stage, the compressed metal material block is pushed out of the body of the horizontal metal briquetting machine, and accurately falls on the conveyor behind the briquetting block.

The production process of the horizontal metal briquetting machine can be formed directly by cold pressing, and the original material can be guaranteed not to change while forming, and the loss of recycling after being pressed into blocks is extremely low, so it is widely used at present Used in iron and steel enterprises, recycling processing industry and non-ferrous metal smelting industry. Recycling industry.

Nick brand automatic hydraulic baler packs automatically, unmanned operation, fast speed, simple structure, stable action, low failure rate and easy to clean.