News Center
our commitment to nickbaler
Position:Home > News Center <<    Return
Straw briquetting plant Baler Press
Author : admin Time : 20-11-27 AllPageView : 54

With the depletion of resources and restrictive use based on environmental protection,coal can no longer meet the needs of urban industrialized fuels.With the help of this east wind,the straw briquettes have become popular,attracting many investors.

In daily sales,visitors always ask:"I want to set up a straw briquetting plant,what equipment do I need?How much investment do I need?"This shows the customer's desire to achieve profit through the straw briquetting project,but this question is It is not easy to answer.

Because of different circumstances,the equipment required for the straw briquetting plant is different,and the amount of investment is also different.Today,Nick Machinery will introduce to you what equipment is needed to set up a straw briquetting plant.

For straw briquetting machine manufacturers,we must deeply understand the customer's actual situation,such as the type of raw materials of the briquettes,the particle size of the raw materials,whether they need to be mixed and dried,and many other factors.For example,a customer uses wood chips as raw materials.

微信图片_20190905093359 拷贝.jpg

The source of raw materials is a furniture factory,and the ratio of dry wood chips is very large.A set of straw briquetting machine equipment is used to complete the customer's production needs.

This is a good case,and it is also the result of mutual satisfaction resulting from the on-site understanding of the customer's situation.It is a great help for customers who have just entered the briquetting industry.

What equipment the straw briquetting plant needs depends on the raw materials you briquette.According to the situation,you can choose coarse crushing equipment,drying equipment,fine crushing equipment,straw briquetting equipment,coolers,screening machines,packaging machines,etc.

Nick Machinery is a professional manufacturer of straw briquetting equipment.It has more than ten years of experience in designing straw briquetting machine production lines.We hope to enhance the value for you through our expertise.Company website:www.nickbaler.net,phone:86-29-86031588


Recommended news
  • Through what aspects can you understand the hydraulic baler?

    Nick hydraulic baler has simple structure, stable action, simple operation, low failure rate and easy cleaning and maintenance. It is a good helper for your production.

    In our daily life, we can often see hydraulic balers, and some companies still cannot do without it. Then we want to buy a hydraulic baler, what aspects do we need to understand?

    eeeeeeeee.jpg

    1. You can find the products you need through the Internet. Generally, manufacturers who are capable of making hydraulic baler products will have their own official website. Through the official website product introduction, learn about the detailed parameters and introduction of each product, and the applicable industry. Working hours, etc., like hydraulic baler network, is the most professional industry website in China, users can learn more about each product above through the website;

    2. Introduced by friends around you, such as your colleagues or users who have hydraulic balers around to learn about the performance of the baler, the failure rate, and the after-sales service of the manufacturer. These are often in reality. Problems encountered

    3. Through industry websites, such as hydraulic baler net, China Packaging Net, China Hardware Net, China Paper Net, Global Hardware Net, etc., there are usually many manufacturers of hydraulic baler products, you can click to check it out. Learn more about hydraulic baler.

    DC2042.jpg

    If you need a hydraulic baler, please visit the Nick Machinery website www.nkbaler.net, there are product pictures and videos, please click to watch! Or call 86-29-86031588, if you don’t understand, someone will be responsible for the explanation.


  • Correct operation of straw silage baler

    Nick corn stalk baler has simple principle, convenient operation and automatic bale delivery, which improves work efficiency.

    The straw silage baler is a kind of mechanical equipment that can be seen frequently. It is very convenient to use, can quickly pack the silage, and it is also very simple to operate. Do you know the correct operation method?

    157727851637610469 拷贝.jpg

    1. The operator of hydraulic equipment must understand the principle of the system, grasp the sequence of actions of the straw silage baler system and the adjustment methods of each component.

    2. Before starting the equipment, check whether all movement organizations and solenoid valves are in the original condition, check the oil tank level, if the oil is insufficient, prohibit the engine.

    3. The oil temperature of the straw baler is usually controlled at about 35 degrees. When the temperature in the oil tank does not reach a certain temperature in winter, it is forbidden to start performing the sequence of elements. The heater should be turned on for heating or the oil pump should be started. Let the pump run dry. When the oil temperature is too high in summer, a certain cooling method should be adopted. Pay close attention to the operation status of the system. If there is any doubt, stop the pump in time.

    It should be noted that when the shutdown time of the straw silage baler exceeds 4 hours, the hydraulic pump should be idling for about 5 minutes before the equipment starts operation.

    751532528175499023.jpg

    If you are interested in the above straw silage baler or have questions, please log in to our company's website: www.nkbaler.com, or call: 86-29-86031588


  • Abnormal pressure of garment Baling Press machine

    Nick brand clothing baler is recognized by many customers with its high-quality qualifications and professional craftsmanship according to everyone's actual needs, and is trustworthy.

    We mentioned above that there are three reasons for the abnormal pressure of the garment Baling Press machine. Now let's talk about how to solve the abnormal pressure.

    1. When installing and debugging the hydraulic pump, you must carefully read the instruction manual and strictly implement the installation and debugging process requirements. Confirm the suction and discharge ports of the pump, and be sure to fill the pump with hydraulic oil before starting the hydraulic pump. The oil inlet and outlet ports of the hydraulic pump must be well sealed and must not leak or enter air. If it is confirmed whether there is air ingress, grease the sealing part to see if the noise of the pump is significantly reduced to determine whether there is air ingress during pump operation.

      IMG_20180531_140110.jpg

    2. When assembling the hydraulic pump for the garment baler, the cleaning and assembly process procedures must be implemented. For example, the blades in the vane pump must not be installed backwards, and the movement must be flexible. After the blades are coated with oil, it is appropriate that they can automatically fall into the rotor groove by their own weight. The processing, storage and transportation of the parts in the pump must strictly comply with the drawings and various technological requirements, and the inspection system must be strictly inspected before assembly. Unqualified parts cannot be installed on the pump.

    Only when the pressure value of the garment Baling Press machine is in a reasonable range can the equipment exert its excellent performance and work more efficiently.

    IMGP2067.jpg

    For more information about the clothing baler, please log on to the Nick Machinery website www.nkbaler.net, Tel: 86-29-86031588, best-selling models: NK120LT, NK-T90S, and support custom-made models of balers, welcome arrival.

Recommended products
  • Mini Paper Baling Press machine
  • Servo Sytem Rice Straw Horizontal Baler
  • Servo System Horizontal Baler Machine
  • New baler for horse Baler supplier
Recommended Assorises
  • Semi automatic Strapping Machine
  • Wooden Crusher /Wooden Shredder
  • Hydraulic Forklift Truck
  • Strapping Baling Wire for Baler
  • Pipe Shredder with Hydraulic Balers
  • PP Belts,PP Straps Materials
Contact Us
  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • sales@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China
Inquiry Us
Copyright © 2019 NICKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top