Q1: What is the Refuse Derived Fuel ?

Refuse derived fuel (RDF) is a broad fuel concept which consists of many different wastes including commercial, post industrial and post-consumer waste.Plastic packaging materials like plastic filmPET bottles, paper industry rejects high-caloric plastics, wood waste, and other mixed waste are common input materials to produce alternative fuel pelets. Modern waste conversion technoloaies are increasing the eneray recovery rates from waste to va uable products.Sorting,pre-shredding,separation and granulating are the main processes in RDF plant.Hence RDF baler RDF shredder and RDF granulator are popular recycling machines in whole RDF line.

Q2:Why you choose NICKBALER for RDF baler?

1.This machine uses the equipment of two-cylinder balance compression and Special hydraulic system which make the power more stable.

2. The high load structure, automatic turn bag set, makes it safe and reliable.

3. The way to open the door in the right angle make it pack be cross.

4. The machine is suitable for the compression and packing of rigid plastics,

Computer outer covering and related materials.

The MSW vertical cradboard box balerhas good rigidity and stability, beautiful appearance, convenient operation and maintenance, safe and energy-saving, and low investment cost of equipment basic engineering. It can greatly reduce transportation costs. It is widely used in various waste paper mills, waste recycling companies and other units and enterprises. It is suitable for packaging and recycling waste paper, plastic straw, etc. The vertical cradboard box baler improves labor efficiency and reduces Good equipment for labor intensity, labor saving, and reduction of transportation costs, and suitable models can also be tailored according to needs.

MSW Vertical cradboard box baler baler is used to squeeze waste paper and similar products under normal conditions, and pack them with special packaging belts to greatly reduce their volume, thereby reducing transportation volume, saving freight, and increasing benefits for enterprises Purpose. Used for packaging of waste paper (cardboard boxes, newsprint, etc.), waste plastics (PET bottles, plastic films, turnover boxes, etc.), straw and other loose materials.

The type MSW cradboard box  baler has the characteristics of convenient operation and maintenance, safety and energy saving, and low investment cost of equipment basic engineering. In terms of installation, the vertical cradboard box baler does not require foot screws during installation, and only needs to choose a stable ground. In terms of power, some models support diesel engine power. When MSW the vertical cradboard box  baler is used in places without power, diesel engines can be used as power. In terms of structure, the pusher cylinder and the pusher head of the MSW vertical cradboard box balerare connected by a spherical structure, which has good reliability and long service life of the oil seal. At the same time, there is a distributed shearing knife at the feeding port, which has high shearing efficiency.

Shaanxi Nick Machinery Equipment Co., Ltd. has been committed to the research, development and manufacturing of cradboard box balers and hydraulic balers for many years, and has complete after-sales services. If necessary, contact www.nkbaler.com.

Diesel engine vertical balers are optional for the places where electricity is not available or higher cost compared to diesel oil. All our baler machines can be customized with diesel engine. Ideal for pressing paper, cardboard, plastics, film, aluminum cans, solid wastes etc. If you’re wondering to find a suitable baler machine.

Specially designed for recycling waste cardboard, cartons and newspaper etc

Features

• Automatic chain bale ejector for quickly and easily ejecting the bales out from the machine

• Wide feed opening door lifts upwards automatically when the platen goes up

• The ram will stop running downwards when the feeding gate is opened which ensure the safety of the operation

• Equipped with independent emergency stop for safe operation 

1. The rail steel bag outlet, fully automatic microcomputer control electric box, can realize automatic feeding, automatic pressing and automatic out of the bag, which effectively saves labor costs.

2. Remote control of the electric box, simple and convenient operation, remote control is also possible. You can choose the control method according to your own habits.

3. 4-layer steel wire high pressure tubing, the tubing is wear-resistant, high-density, and thick-walled to ensure no oil spray or oil leakage during work.

4. Brand high pressure plunger pump, high pressure plunger pump, high efficiency, low noise and high quality. The flow part from the inlet to the outlet of the oil pump is made of cast iron. The pump body is non-corrosive and anti-wear hydraulic oil medium.

This Rubber Hydraulic Cutting Machine used for cutting all kinds of large sized natural rubber or synthetic rubberproducts,such as large plastic tubes,bale film,rubber lump,sheet materials and etc. this machine used two cylinder to cut ,and keep it balance,mainly consists of rubber knife,

frame, cylinder, base, auxiliary table, hydraulic system, and electric system.

Its with NIck brand company design and special developent on this point for protecting the edge of the rubber knife. When cutting the raw rubber, put the raw rubber under the rubber knife, then press the start button, the knife can cut the rubber into small pieces. Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder

Machine Features :

1.Hydraulic control operation ,manual feeding ,auto-cutting .

2.Hydraulic system stabilization , double cylinder balance cutting .

3.It can fix security masks and safety nets equipment for protecting .

4.It can fix auto-roller processing after cutting .

NK-T60L 45kg Used Clothes Bale Press Machine Widely applied by second-hand clothes recycling plants for compressing clothing, comforters, shoes etc. Hydraulic lifting chamber door improves the work efficiency, conveniently for packaging and the tight crossed tying.

Features

1.Double chamber Structure for carrying out loading and baling synchronously to increase working efficiency

2.Cross Strapping for making tighter and neater bales 

3.Availability for Bale Wrapping either plastic bags or sheets can be used as the wrapping material, protecting the textile material from getting damp or stained

4.Adjustable Bale Height for achieving various bale size and weight 

5.Electric Controlled for easy operation, simply operating on buttons to move platen upward and downward.

Textile/Clothes Balers

NK-T120S Double Chambers Used clothing baler Suppliers Widely applied by second-hand clothes recycling plants for compressing clothing, comforters, shoes etc. Hydraulic lifting chamber door improves the work efficiency, conveniently for packaging and the tight crossed tying.

Features

1.Double chamber Structure for carrying out loading and baling synchronously to increase working efficiency

2.Cross Strapping for making tighter and neater bales 

3.Availability for Bale Wrapping either plastic bags or sheets can be used as the wrapping material, protecting the textile material from getting damp or stained

4.Adjustable Bale Height for achieving various bale size and weight 

Textile/Clothes Balers

NK-T90S Lifting Chamber Baler with Two chambers Baler Widely applied by second-hand clothes recycling plants for compressing clothing, comforters, shoes etc. Hydraulic lifting chamber door improves the work efficiency, conveniently for packaging and the tight crossed tying.

Features

1.Double chamber Structure for carrying out loading and baling synchronously to increase working efficiency

2.Cross Strapping for making tighter and neater bales 

3.Availability for Bale Wrapping either plastic bags or sheets can be used as the wrapping material, protecting the textile material from getting damp or stained

4.Adjustable Bale Height for achieving various bale size and weight 

5.Electric Controlled for easy operation, simply operating on buttons to move platen upward and downward.

Textile/Clothes Balers

Widely applied by second-hand clothes recycling plants for compressing clothing, comforters, shoes etc. Hydraulic lifting chamber door improves the work efficiency, conveniently for packaging and the tight crossed tying.

Features

●　Two chambers to improves the work efficiency, conveniently for packaging and the ‘# ‘tying

●　The ram will stop running downwards when the feeding gate is opened which ensure the safety of the operation

●　Equipped with independent emergency stop for safe operation